The main features of the Nakamichi MR-1 cassette deck are: 3 discrete heads and off-tape monitoring, digital tape counter with 4 digits and memory stop, manual tape type selection and capable of handling normal, chrome and metal tapes with additional manual equalization selection, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Nakamichi MR-1 cassette deck are generic digital peak reading meters. Full-logic transport controls used on the Nakamichi MR-1 let it respond to the slightest finger contact for fast and effortless transport function selection. Playback speed may be adjusted with pitch control.
Dolby C-type used in the Nakamichi MR-1 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. A Subsonic filter is provided in the Nakamichi MR-1 to prevent infrasonic signals generated when playing a warped record. These signals can upset the Dolby system and prevening it from functioning properly. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the MR-1 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a XLR or 1/4 inch cable and recording from a source by a XLR cable. All main transport commands can be issued remotely with a wired remote control.
¼-inch Input Connectors
AC Power Cord / Plug
XLR Output Jacks
Headphones
Wired Remote Control
XLR Input Jacks
Digital Peak-Reading Meters
4-Digıt Digital Counter
Record Protection
Orientation Center
19-Inch EIA Rack Mounting
Black Finish
Front Loading
Stereo
Pressure Pad Lifter
3 Head Desiǥn
4 Track / 2 Channel
Seperate Record and Playback Heads
Dolby-B Noise Reduction
MPX Filter
Subsonic Filter
External Noise Reduction
Dolby-C Noise Reduction
Full Logic Transport Control
Timer Recording/Playback
Record Mute
One-Touch Record/Pause
Memory Stop
Pitch Control
Real-Time Tape Monitoring
Alternating Current
Individual Input Level Controls
Output-Level Control
Headphone Volume Control
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Normal Tape Capabilıty
Manual Tape Equalization
Chrome Tape Capabilıty
Metal Tape Capabilıty
Auto Shutoff
Direct Drive (Capsŧan)
Slack-Tape Takeup
Mechanical Tape Loading
Dual-Capsŧan Transport
DRM-800A
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Dual Capstan
XK-S9000
3 Heads
Dolby-S NR
Full Logic Control
Metal Tape
Dual Capstan
AD-F780
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Dual Capstan
CT-S520
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Single Capstan
KX-930
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Dual Capstan
TD4800
3 Heads
Dolby-S NR
Full Logic Control
Metal Tape
Dual Capstan
Notice on copying anything
Copying Nakamichi MR-1 information from this site and use it in your auction or on your website is not allowed. A link to this page for Nakamichi MR-1 is allowed from your website or auction.