The main features of the Nakamichi BX-300 cassette deck are: 3 discrete heads and off-tape monitoring, digital tape counter with 4 digits and memory stop, manual tape type selection and capable of handling normal, chrome and metal tapes with additional manual equalization selection, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the Nakamichi BX-300 cassette deck are digital LED peak reading meters. Full-logic transport controls used on the Nakamichi BX-300 let it respond to the slightest finger contact for fast and effortless transport function selection. Playback speed may be adjusted with pitch control.
Dolby C-type used in the Nakamichi BX-300 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the BX-300 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
Bias Fine Tune
AC Power Cord / Plug
RCA Input/Output Connectors
Headphones
Wired Remote Control
4-Digıt Digital Counter
Digital LED Peak-Reading Meters
Record Protection
Orientation Center
Black Finish
Front Loading
Stereo
Pressure Pad Lifter
3 Head Desiǥn
4 Track / 2 Channel
Seperate Record and Playback Heads
Dolby-B Noise Reduction
MPX Filter
Dolby-C Noise Reduction
Full Logic Transport Control
Memory Repeat
Timer Recording/Playback
Record Mute
Memory Stop
Electronic Fade-Out
Pitch Control
Real-Time Tape Monitoring
Tape Start Memory
Electronic Fade-In
Alternating Current
Individual Input Level Controls
Output-Level Control
1⅞ ips - 4.76 cm/s
Manual Tape Type Selection
Normal Tape Capabilıty
Manual Tape Equalization
Chrome Tape Capabilıty
Metal Tape Capabilıty
Auto Shutoff
Direct Drive (Capsŧan)
Slack-Tape Takeup
Mechanical Tape Loading
Dual-Capsŧan Transport
3x Motor Mechanism
TA-2900
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Dual Capstan
R-888X
3 Heads
Auto Reverse
Dolby-C NR
Full Logic Control
Metal Tape
V-850X
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Single Capstan
GX-R99
3 Heads
Auto Reverse
Dolby-C NR
Full Logic Control
Metal Tape
GX-R88
3 Heads
Auto Reverse
Dolby-C NR
Full Logic Control
Metal Tape
RS-B100
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Dual Capstan
Notice on copying anything
Copying Nakamichi BX-300 information from this site and use it in your auction or on your website is not allowed. A link to this page for Nakamichi BX-300 is allowed from your website or auction.