The main features of the Nakamichi ZX-5 are: 3 discrete heads and off-tape monitoring, digital tape counter with 4 digits and memory stop, manual tape type selection and capable of handling normal, chrome and metal tapes with additional manual equalization selection, dual capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well which is opened by a damped mechanism.
Level meters used on the ZX-5 are digital LED peak reading meters. Full-logic transport controls used on the ZX-5 let it respond to the slightest finger contact for fast and effortless transport function selection. Playback speed may be adjusted with pitch control.
Dolby C-type used in the ZX-5 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the ZX-5 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
TA-2900
R-888X
K-1020
V-850X
GX-R99
RS-B100
Copying Nakamichi ZX-5 information from this site and use it in your auction or on your website is not allowed. A link to this page for Nakamichi ZX-5is advised from your website or auction.