Nakamichi BX-150E
The main features of the Nakamichi BX-150 are: 2 heads, digital tape counter with 4 digits and memory stop, manual tape type selection and capable of handling normal, chrome and metal tapes with additional manual equalization selection, belt driven single-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the center of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well.
Level meters used on the BX-150 are digital LED peak reading meters. Full-logic transport controls used on the BX-150 let it respond to the slightest finger contact for fast and effortless transport function selection.
Dolby C-type used in the BX-150 provides 20 dB of noise reduction above about 1,000 Hz, fully doubling the amount given by B-type. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the BX-150 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable.
KD-VR320
SD-551
RT-350
AD-R500
CT-940
TA-R33
Copying Nakamichi BX-150 information from this site and use it in your auction or on your website is not allowed. A link to this page for Nakamichi BX-150is advised from your website or auction.