The main features of the Nakamichi 582 cassette deck are: 3 discrete heads and off-tape monitoring, mechanical 3 digit tape counter and memory stop, manual tape type selection and capable of handling normal, chrome and metal tapes with additional manual equalization selection, belt driven dual-capstan transport.
Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well which is opened by a damped mechanism. Additionally the compartement can be accessed easly for head cleaning by removing the well-cover.
Level meters used on the Nakamichi 582 cassette deck are analog needle VU reading meters. Full-logic transport controls used on the Nakamichi 582 let it respond to the slightest finger contact for fast and effortless transport function selection. Cue and review can be used to easily and quickly locate the beginning of a passage at two speeds.
To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording.
The Dolby-B system reduces tape hiss on tapes recorded on the Nakamichi 582 by as much as 10 dB at the highest frequencies. The three-head configuration of the Nakamichi 582 requires a Double Dolby system, one for recording and one for playback. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the 582 filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs.
For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control.
Manual Bias Calibration
15kHz Test Tone
400Hz Test Tone
Manual Level Calibration
AC Power Cord / Plug
DIN Input/Output Connector
Wired Remote Control
DC Power Output For BlackBox Series
RCA Input/Output Connectors
Headphones
3-Digıt Mechanical Counter
Analog Needle Meters
Double NF Record And Play Amplifiers
Record Protection
Orientation Left
Black Finish
Front Loading
Stereo
Pressure Pad Lifter
3 Head Desiǥn
4 Track / 2 Channel
Seperate Record and Playback Heads
Record
Fast Forward
Rewind
Stop
Play
Pause
Illuminated Cassette Compartment
Dolby-B Noise Reduction
Double Dolby NR Circuits
MPX Filter
Full Logic Transport Control
Cue / Review
Real-Time Tape Monitoring
Tape Start Memory
Timer Recording/Playback
Record Mute
Memory Stop
Removable Well Cover
2-Speed Cueing
Damped Eject
Alternating Current
Output-Level Control
Master Record Level Control
Record Level Balance Control
1⅞ ips - 4.76 cm/s
Manual Tape Equalization
Metal Tape Capabilıty
Normal Tape Capabilıty
Chrome Tape Capabilıty
Manual Tape Type Selection
Mechanical Tape Loading
Idler Drive (Reel)
3x Motor Mechanism
Belt Drive (Capsŧan)
Belt Drive (Mechanism)
Auto Shutoff
Slack-Tape Takeup
Dual-Capsŧan Transport
RS-9900US
3 Heads
Dolby-B NR
Full Logic Control
FeCr Tape
Dual Capstan
CT-970
3 Heads
Dolby-C NR
Full Logic Control
Metal Tape
Single Capstan
RT-9
3 Heads
Dolby-B NR
Full Logic Control
Metal Tape
Dual Capstan
RT-9100
3 Heads
Dolby-B NR
Full Logic Control
Metal Tape
Dual Capstan
D-1100MB
3 Heads
Dolby-B NR
Full Logic Control
Metal Tape
Dual Capstan
RT-6905
3 Heads
Dolby-B NR
Full Logic Control
Metal Tape
Dual Capstan
Notice on copying anything
Copying Nakamichi 582 information from this site and use it in your auction or on your website is not allowed. A link to this page for Nakamichi 582 is allowed from your website or auction.